ECE 449 Assignment 9

1. Write an assembly language program to test the various jump/call instructions, both from registers and from an immediate value.

   Run your program within the Nios II Command shell, producing the usual text files and generate a MIF of your program.

2. Modify the risc processor started in the last assignment by adding the jump/call instructions. As usual, setup your DE2 project so that it displays the results of each instruction on the DE-2 board. Download srisc6 for a version based on the last assignment. Demonstrate that your project runs the assembly language program from the previous problem.

Maintained by John Loomis, last updated 22 April 2008